Nylon: tough and low-friction, 61 MPa tensile strength and up to 119 °C. For gears, clips and hinges.
PA (polyamide, better known as nylon) is a tough, low-friction, wear-resistant engineering polymer. We use a nylon formulated to warp little during printing: 61 MPa tensile strength, 15% elongation before breaking and heat resistance up to about 119 °C. Suited to gears, bushings, hinges and snap-fit clips. Like every nylon it absorbs some moisture, so in very humid environments it loses part of its stiffness.
Typical applications
| Elastic modulus | — |
|---|---|
| Yield strength | — |
| Tensile strength | 61 MPa |
| Elongation at break | 15 % |
| Density | 1.10 g/cm³ |
|---|---|
| Izod impact (notched) | 11 kJ/m² |
| Heat deflection temperature @0.45 MPa | 119 °C |
| Technology | Large Scale |
|---|---|
| Material group | Polymers |
| Color | multicolor (on demand) |
Directional properties (XY vs Z). Like all FDM materials, it is stronger in the print plane (XY) than across layers (Z). We orient the part to the load.
Send us a photo, a sketch or the broken part. We design it and give you STEP and STL files to print on your own printer, or we print it for you.
